Home > Support > Software Download > For Windows

PL2303 USB OBDII Driver

  • Updated2015-09-05 18:24:16

Detailed


==================================================

PL-2303 CheckChipVersion Tool Program v1.0.0.6

For Windows OS Only

==================================================


System Requirement:

  . USB 1.1/2.0/3.0 Host Controller

  . Device using PL2303HX/X/EA/RA/SA/TA/TB version chips

  . PL-2303 Windows Driver Installer v1.8.0 or above

  . Supports the following Windows OS Family:

- Windows XP SP2 and above (32 & 64 bit)

- Windows Vista (32 & 64 bit)

- Windows 7 (32 & 64 bit)

- Windows 8/8.1/10 (32 & 64 bit) 

NOTE: 

  - Windows 8 is NOT supported in HXA/XA chip versions (will show yellow mark Error Code 10).

  - Windows 8 is supported only in following chip versions:

      - PL2303HXD (HX Rev D)

      - PL2303EA (ESD protection)

      - PL2303RA (Built-in transceiver)

      - PL2303SA (SOP8 package)

      - PL2303TA (PL2303HXA/XA replacement)

      - PL2303TB (12 GPIO)

 

Supported device ID and product strings:

  . VID_067B&PID_2303 for "Prolific USB-to-Serial Comm Port"

  . VID_067B&PID_2304 for "Prolific USB-to-Serial Comm Port" (PL2303TB chip)

  . Other VID/PID based on PL2303 chip.